Search
0512-6255 1277
The SX-JCQ-7 sampler is an efficient microporous suction sampler that supports both "integrated" and "split" sampling heads. The "integrated" sampling head is directly installed on the equipment base and is suitable for collecting samples in open spaces, while the "split" sampling head is connected to the equipment through a trachea and is suitable for collecting samples in narrow spaces (spaces where the equipment cannot be placed). With two styles of sampling heads, the SX-JCQ-7 sampler can use the "split" sampling head to collect any sample air without blind spots, and can also use the "integrated" sampling head to conveniently collect samples in various open spaces.
The SX-JCQ-7 sampler is an efficient microporous suction sampler that supports both "integrated" and "split" sampling heads. The "integrated" sampling head is directly installed on the equipment base and is suitable for collecting samples in open spaces, while the "split" sampling head is connected to the equipment through a trachea and is suitable for collecting samples in narrow spaces (spaces where the equipment cannot be placed). With two styles of sampling heads, the SX-JCQ-7 sampler can use the "split" sampling head to collect any sample air without blind spots, and can also use the "integrated" sampling head to conveniently collect samples in various open spaces.Due to the pollution caused by microorganisms and dust particles, which can affect production and process flow, the demand for detecting environmental microorganisms (dust) has been growing. Microbial monitoring is particularly important for industries such as pharmaceuticals, food, hospitals, cosmetics, and environmental protection. The SX-JCQ-7 professional planktonic bacteria sampling head is made of anodized aluminum alloy material to ensure compliance with ISO 14698-1 technical specifications, with a smooth and clean surface. Professional laser drilling is used to drill holes with a diameter of 0.7mmx397, ensuring a particle velocity of 10.8m/s, which captures particles larger than 1um.
Advantage
• Flat design of touch panel, no dust accumulation phenomenon.
• Flow closed-loop self-regulation, stable at 100L/min ± 5%.
• Built in lithium battery pack for portable use.
• Support data storage, capable of recording and tracing past data.
• Support audit tracking and storage of personnel operation records.
• Support user management and configure three-level permissions.
• WiFi and LORA communication to enhance security.
• Equipped with Bluetooth printer, capable of printing sampling data.
• Support USB drive export, which can export data sampling records and audit trail records.
• Low noise, providing a comfortable working environment.
Function
• Supports two working modes: "integrated" and "split"
• 4.3-inch touch screen, simplified operation
• The flow control device will ensure the sampling flow rate
• Φ 0.7mm × 397 hole mesh, ensuring an impact velocity of 10.8m/s
• Compliant with ISO 14698-1/2 standard
Apply
• Microbial air sampling in cleanrooms and related controlled environments
• Microbial sampling control
• Microbial monitoring in the production environment of medical equipment
| Model | SX-JCQ-7 |
| Display screen | 4.3-inch touch screen |
| Sample flow | 100L/min ± 5% sampling flow closed-loop automatic adjustment |
| Single sampling quantity | 1-6000L |
| Sample delay | User self setting (0-14400 seconds) |
| Region management | Can preset 400 sampling areas and independently save configuration parameters |
| Mueller-Hinton agar | Φ90mm × 15mm |
| Vacuum power source | Imported fan, continuous and stable operation, energy-saving and environmentally friendly |
| Compliant with standards | GMP、ISO 14698-1/2、GB/T 16293-2010 |
| User Management | 250 users with independent passwords |
| Rights Management | Third level permissions, data storage and retrieval, printing |
| Data memory capacity | 1 to 30000 sets of measurement data and 1 to 60000 sets of audit tracking records can be queried |
| Working hours | Fully charged for continuous testing for 6 hours |
| Charging power supply | AC power (220V/50Hz) |
| Built-in Lithium Battery | DC 14.8V 6.6Ah |
| Charging adapter | Input 100V-240V 1.3A, output 24V 3.75A |
| Battery charging time | 6-8 hours |
| Data communication interface | RS485: Modbus RTU protocol, Ethernet: Modbus TCP/IP protocol |
| Environment requirements | Usage environment: Temperature 0~40 ℃, relative humidity 10~70% RH |
| Storage environment: Temperature -30~45 ℃, relative humidity 0~90% RH | |
| External dimensions | Length 200 x Width 274 x Height 190 (mm) (including handle and external interface) |
| Material | AL6061 anodized aluminum alloy |
| Power | 20W |
| Weight (including battery) | 3.3kg |
| Other accessories | RS485 terminal, power adapter, Bluetooth printer |
| Warranty | 1-year warranty, optional extended warranty service |
Submit the form below to contact us now.