Search

Language
Chinese English
0512-6255 1277
Products

Aerosol Generator

Aerosols are collections of liquid or solid particles that remain suspended in a gas environment for extended periods and can be observed or measured. In the fields of air detection and monitoring, such as the calibration of aerosol measurement instruments, the study of indoor particulate movement characteristics, the investigation of respiratory particle movement patterns, and the testing of air filter efficiency, stable and reproducible monodisperse or polydisperse aerosol generators are essential.

 Solutions Download
Product Details
Product Videos

Aerosols are collections of liquid or solid particles that remain suspended in a gas environment for extended periods and can be observed or measured.
In the fields of air detection and monitoring, such as the calibration of aerosol measurement instruments, the study of indoor particulate movement characteristics, the investigation of respiratory particle movement patterns, and the testing of air filter efficiency, stable and reproducible monodisperse or
polydisperse aerosol generators are essential.
The SX-Q5 is a cold generation type of multi-dispersed aerosol generator.
Based on the LasKin principle nozzle technology, under the action of compressed air, the aerosol raw solution is atomized and foamed by the nozzle. Large droplets are blocked back to the liquid surface by the baffle, while smaller droplets escape with the airflow, forming an aerosol with particle sizes below 1um.
SX-Q6 is a cold generation type multi-dispersed aerosol generator.
Based on the LasKin principle nozzle technology, it features a small built-in compressed air pump to generate compressed air. The aerosol solution is atomized and foamed through the nozzle. Large droplets are directed back to the liquid surface by the baffle, while smaller droplets escape with the airflow, forming an aerosol with particle sizes below 1um.
All the above products can produce cold occurrence aerosol, which can make the aerosol generator small and light in size, suitable for medical device inspection institutes, centers for disease control and prevention, hospitals, pharmaceutical enterprises, high-efficiency filter manufacturers and other leakage detection of cleanrooms and high-efficiency filters.



Advantage

• Provide complete operation manual to facilitate compliance with pharmaceutical/electronic specifications.
• Cooperate with air vent leak detector to detect the integrity of high efficiency filter.
• Air intake pressure regulation, atomization pressure regulation.
• It will not pollute the environment.
• Q6 built-in compressed air pump, atomization pressure regulation.


Apply

• Air filtration equipment testing
• Calibration and detection of aerosol measuring device
• Basic research on aerosols
• Study of inhalation toxicity
• Flow field tracing
• Large wind tunnel studies

Technical Specifications
Model SX-Q5 SX-Q6
Aerosol DEHS、DOP、PAO DEHS、DOP、PAO
Number of Laskin nozzles 6 6/2 (switchable)
Compressed gas External air source is required No, built-in air compressor
Spray pressure 0~60kpa 20psi
Aerosol concentration 0~2×1012P/L 100ug/L at a flow rate of 810ft³/min
/ 10ug/L at a flow rate of 8100ft³/min
Aerosol particle size distribution ≤1μm ≤1μm
Aerosol type Multi-dispersed particles (cold) Multi-dispersed particles (cold)
Adapt to the system total air volume ≤40000m³/h ≤40000m³/h
Power supply Non-essential AC single phase 220V/50Hz
Outline dimension Length 270 x width 192 x height 372 (mm) Length 305 x width 290 x height 270 (mm)
Material quality SUS304 stainless steel SUS304 stainless steel
Weight 8.6kg 16.5kg
Air suspension particle output range / 50~8100ft³/min
Concentration of suspended particles / 100ug/L at a flow rate of 810ft3/min
/ 10 ug/L at a flow rate of 8100ft3 / min

Submit the form below to contact us now.

Submit Now