In the newly implemented standards in January, there were 36 standards related to medicine and health, accounting for 27%, followed closely by the fields of power semiconductors and agriculture, forestry, animal husbandry, and fishery food. Among the 36 standards related to medicine and health, the main ones are industry standards, including medical device standards, medical protection standards, detection and analysis standards, etc. There are 24 food related standards, mainly involving various planting, cultivation, and breeding technical regulations.
The specific new standards to be implemented in January 2024 are as follows:
Food standards for agriculture, forestry, animal husbandry and fishery (24)
GB 29,753-2,023 safety requirements and test methods for refrigerated vehicles of perishable food and biological products for road transportation
GB/T 9,985-2,022 hand washing tableware detergent
GB/T 17,714-2,022 general rules for beer barrel quality
GB 7,300.104-2,022 first part of feed additives: amino acids, amino acid salts and their analogues L- valine
GB 7,300.303-2,022 third part of feed additives: mineral elements and their complex (chelate) complex potassium iodate
GB 4,143-2,022 frozen semen of cattle
DB31/T 1,434-2,023 technical specifications for disinfection of new coronavirus in imported cold chain food packaging
DB31/T 1,431-2,023 technical requirements for mechanized production of chicken hair vegetables in the whole process
DB36/T 1,805-2,023 technical regulations for the reduction and control of phosphorus loss in rice fields
DB36/T 1,804-2,023 technical regulations for rice frog co planting
DB36/T 1,803-2,023 technical regulations for cultivation of angular jargon
DB36/T 1,802-2,023 technical regulations for the cultivation of Cyclobalanopsis
DB36/T 1,801-2,023 technical regulations for the construction of torch pine cutting garden
DB36/T 1,800-2,023 technical regulations for the production of Ganoderma
DB36/T 1,799-2,023 technical procedures for strain identification of chashugu
DB36/T 1,798-2,023 technical regulations for mechanized direct seeding of rice
DB36/T 1,797-2,023 technical regulations for the transplanting of male parent and female parent of Indica Hybrid Rice
DB36/T 1,796-2,023 technical specifications for synchronous operation of deep side fertilization and weeding machine insertion of rice
DB36/T 1,795-2,023 technical regulations for raising rice seedling with big bowl and blanket
DB36/T 1,794-2,023 technical regulations for Gongfu black tea processing
DB36/T 1,792-2,023 oil tea meteorological observation specification
DB36/T 1,787-2,023 norms for the evaluation of the effectiveness of anti food waste work in the office canteen
DB36/T 784-2,023 technical regulations for the production of Shennong supporting line pigs
GB 7,300.403-2,022 fourth part of feed additives: enzyme preparation, cellulase
Environmental protection standards (11)
HJ 1,296-2,023 technical guide for water ecological monitoring monitoring monitoring and evaluation of aquatic organisms in lakes and reservoirs (Trial)
HJ 1,295-2,023 technical guide for water ecological monitoring monitoring monitoring and evaluation of river hydrobios (Trial)
DB31/T 1,433-2,023 technical specifications for dust online monitoring
DB31/T 1,432-2,023 technical specifications for sludge treatment and disposal of urban water supply plants
DB34/T 4,468-2,023 technical regulations for operation, maintenance and safety of intelligent interception and storage facilities of urban drainage network
DB32/T 4,498-2,023 design standard for urban river water environment comprehensive treatment project
DB11/ 1,201-2,023 emission standard of air pollutants for printing industry
DB11/ 1,227-2,023 emission standard of air pollutants for automobile manufacturing industry
GB 28,489-2,022 limit of harmful substances for musical instruments
GB 21,288-2,022 electromagnetic radiation exposure limits of mobile communication terminals
GB/T 43,121.1-2,023 ships and marine technology aquatic harmful species the first part: ballast water discharge sampling interface
Medical and health standards (36)
GB/T 16,886.9-2,022 biological evaluation of medical devices the ninth part: qualitative and quantitative framework of potential degradation products
GB/Z 42,217-2,022 medical devices used for the confirmation of medical device quality system software
GB/T 16,886.15-2,022 biological evaluation of medical devices the fifteenth part: qualitative and quantitative analysis of metal and alloy degradation products
GB/Z 16,886.22-2,022 biological evaluation of medical devices the twenty-second part: nanomaterials Guide
GB/T 16,886.19-2,022 biological evaluation of medical devices the nineteenth part: physical chemistry, morphology and surface characteristics of materials
GB/T 16,886.18-2,022 biological evaluation of medical devices the eighteenth part: chemical characterization of Traditional Chinese Medicine medical device materials in the process of risk management
GB 42,302-2,022 respiratory protection self suction filter type escape respirator
GB 2,890-2,022 respiratory protection self suction filter type gas mask
GB 42,301-2,022 technical specifications for the construction of the core capacity of port public health
YY/T 1,886-2,023 dental capsule silver amalgam
YY/T 1,876-2,023 tissue engineering medical products - Determination of DNA residues in animal derived biomaterials: fluorescent staining
YY/T 1,871-2,023 medical isolation clothing
YY/T 1,870-2,023 General requirements for LC-MS kits
YY/T 1,868-2,023 hepatitis B virus core antibody detection kit (Luminescent Immunoassay)
YY/T 1,867-2,023 sports medical implant equipment with thread anchor
YY/T 1,863-2,023 biological evaluation of nano medical devices release and characterization of nano silver particles and silver ions in nano silver dressing
YY/T 1,862-2,023 special technical conditions for coronary CT image processing software
YY/T 1,861-2,023 special technical conditions for medical image storage and transmission system software
YY/T 1,850-2,023 technical requirements and test methods of male condom polyurethane condom
YY/T 1,842.7-2,023 connectors for the delivery system of medical devices medical liquid storage containers the seventh part: connectors for intravascular transfusion
YY/T 1,789.6-2,023 sixth part: precision, diagnostic sensitivity and specificity of qualitative reagents
YY/T 1,473-2,023 medical device standardization work guidelines related to the development of safety content standards
YY/T 0,870.7-2,023 genetic toxicity test of medical devices the seventh part: alkaline comet test in vivo of mammals
YY/T 0,730-2,023 requirements for disposable pipe kits for cardiovascular surgical implants and artificial organs cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
YY/T 0,720-2,023 General requirements for disposable production package
YY/T 0,606.15-2,023 test method of tissue engineering medical products evaluation matrix and scaffold immune response: lymphocyte proliferation test
YY/T 0,506.1-2,023 medical operation sheet, surgical clothes and clean clothes the first part: General requirements
Performance and test method of YY/T 1,835-2,022 breast PET imaging device
YY/T 1,789.4-2,022 the fourth part: linear interval and reportable interval
YY/T 1,789.3-2,022 third part: detection limit and quantification limit
YY/T 0,273-2,022 dental amalgam
WS/T 819 - 2,023 equipment configuration standard for county level general hospital
DB31/T 1,430-2,023 medical institutions drug addiction identification service specification
DB31/T 1,429-2,023 health requirements for rural homestay
DB36/T 1,790-2,023 family nursing bed service specification
DB36/T 1,788-2,023 cancer registration report and management standard of medical institutions
Oil and gas standards (8)
GB/T 43,231-2,023 petroleum and natural gas industry shale oil and gas well casing selection and condition applicability evaluation
GB/T 43,130.1-2,023 liquefied natural gas plant and equipment design of floating liquefied natural gas plant the first part: General requirements
GB/T 43,125-2,023 technical specifications for shale oil capacity evaluation
GB/T 43,126-2,023 technical specifications for geological desserts evaluation of shale oil
Petroleum and natural gas industries pipeline transportation systems (GB/T 24,259-2,023)
GB/T 29,171-2,023 determination of rock capillary pressure curve
GB/T 12,574-2,023 jet fuel determination of total acid number
GB 42,294-2,022 safety regulations for onshore oil and gas exploitation
Chemical plastics standards (2)
GB/T 8,038-2,023 coking - Determination of toluene hydrocarbon impurities - Gas Chromatography
GB 17,762-2,022 safety requirements for heat-resistant glass appliances
Light industry textile standards (2)
GB/T 21,898-2,023 color representation of textiles
GB/T 42,167-2,022 leather for clothing
Power semiconductor standards (25)
GB/T 42,968.1-2,023 integrated circuit electromagnetic immunity measurement the first part: general conditions and definitions
GB/T 42,970-2,023 semiconductor integrated circuit video codec circuit test method
GB/T 42,969-2,023 component displacement damage test method
GB/T 42,968.8-2,023 the eighth part of IC electromagnetic immunity measurement: radiation immunity measurement IC stripline method
GB/T 42,975-2,023 semiconductor integrated circuit driver test method
GB/T 42,974-2,023 semiconductor integrated circuit FLASH
GB/T 42,973-2,023 semiconductor integrated circuit DA converter
GB/T 42,972-2,023 test method of microwave circuit geophone
GB/T 20,870.5-2,023 semiconductor devices Part 16-5: microwave integrated circuit oscillators
GB/T 43,027-2,023 high voltage power converter module test method
GB/T 43,024.2-2,023 measurement technology of piezoelectric, dielectric and electrostatic oscillators the second part: phase jitter measurement method
GB/T 43,023-2,023 guide for nonlinear measurement of radio frequency surface acoustic wave (SAW) devices and bulk acoustic wave (BAW) devices
GB/T 16,515-2,023 the fifth part of potentiometers for electronic equipment: Sectional specification: single turn rotary low power wirewound and non wirewound potentiometers
GB/T 22,317.401-2,023 piezoelectric filters with quality assessment Part 4-1: Blank detail specification capability approval
GB/T 22,319.6-2,023 measurement of quartz crystal element parameters the sixth part: measurement of excitation level correlation (DLD)
GB/T 43,228-2,023 design requirements of radiation hardened integrated circuit unit library for Aerospace
GB/T 43,227-2,023 test method for VPD protection film of internal leads of integrated circuits for Aerospace
GB/T 43,226-2,023 time domain test method for single soft error of space semiconductor integrated circuit
GB/T 43,063-2,023 integrated circuit CMOS image sensor test method
GB/T 20,870.10-2,023 semiconductor devices Part 16-10: Single Chip microwave integrated circuit technology receptive program
GB/T 43,034.3-2,023 integrated circuit pulse immunity measurement the third part: non synchronous transient injection method
GB/T 43,041-2,023 hybrid integrated circuit DC/DC converter
GB/T 43,053-2,023 requirements for operation and performance, test methods and required test results of marine navigation and radio communication equipment and systems ECDIS
GB 31,241-2,022 safety technical code for lithium ion batteries and batteries for portable electronic products
GB/T 22,317.4-2,023 piezoelectric filters with quality assessment the fourth part: sub specification capability approval
Energy standards (17)
GB/T 43,058-2,023 ammonia corrosion test of photovoltaic modules
GB/T 43,057-2,023 photovoltaic module dynamic mechanical load test
GB/T 43,055-2,023 General requirements for rural low-voltage safe electricity use
GB/T 43,056-2,023 technical requirements for desert photovoltaic power stations
GB 21,341-2,022 limit of energy consumption per unit product of ferroalloys
GB 25,324-2,022 limit of energy consumption per unit product of carbon for aluminum
GB 29,448-2,022 limit of energy consumption per unit product of sponge titanium and titanium ingot
GB 21,346-2,022 quota of energy consumption per unit product of electrolytic aluminum and alumina
GB 19,044-2,022 minimum allowable values of energy efficiency and energy efficiency grades of fluorescent lamps for general lighting
GB 17,896-2,022 energy efficiency limit values and energy efficiency grades of ballasts for gas discharge lamps for general lighting
DB36/T 1,807-2,023 technical code for safety monitoring of foundation pit of water conservancy and Hydropower Engineering
DB36/T 1,806-2,023 technical specification for ready mixed concrete of water conservancy and Hydropower Engineering
GB 32,030-2,022 minimum allowable values of energy efficiency and energy efficiency grades of electric submersible pumps
GB 21,518-2,022 minimum energy efficiency values and energy efficiency grades of AC contactors
GB 29,447-2,022 quota of energy consumption per unit product of polysilicon and germanium
GB/T 43,123-2,023 ships and marine technology LNG gas supply system (FGSS) high pressure pump performance test requirements
GB/T 43,122-2,023 ships and marine technology performance test requirements for LNG gas supply system (FGSS)
Mechanical vehicle standards (9)
GB/T 43,119-2,023 technical requirements for the construction of automatic driving closed test site
GB/T 25,334.1-2,023 railway locomotive body the first part: Diesel Locomotive
GB/T 5,338.2-2,023 Series 1 container technical requirements and test methods the second part: insulated container
GB/T 25,334.2-2,023 railway locomotive body the second part: electric locomotive
GB/T 28,712.2-2,023 types and basic parameters of heat exchanger the second part: fixed tube plate heat exchanger
GB 13,057-2,023 strength of bus seats and their vehicle fixings
GB/T 28,712.3-2,023 types and basic parameters of heat exchanger the third part: U tube heat exchanger
GB/T 28,712.1-2,023 types and basic parameters of heat exchanger the first part: floating head heat exchanger
GB 42,295-2,022 electrical safety requirements for electric bicycles
Other standards (1)
GB/T 15,000.8-2,023 guidelines for the work of standard samples the eighth part: use of standard samples
